« forrige neste »
Sider: [1]

Skrevet av Emne: How to make a crossover twisted-pair cable for uplinks  (Lest 5279 ganger)

ATC

  • Gjest
How to make a crossover twisted-pair cable for uplinks
« på: 27. ſeptember 2008, 18:24 pm »
  • [applaud]0
  • [smite]0
    • This article explains how to make a crossover twisted-pair cable used for switch/hub uplinks or direct PC-to-PC connections.
    Loggført


    ATC

    • Gjest
    [Solved] How to make a crossover twisted-pair cable for uplinks
    « Svar #1 på: 27. ſeptember 2008, 18:24 pm »
  • [applaud]0
  • [smite]0
    • Connect the pairs as follows:
    For category 3 cabling: 1-3, 2-6, 3-1, 6-2
    For category 5 cabling: 1-3, 2-6, 3-1, 4-4, 5-5, 6-2, 7-7, 8-8
    ...or to put it simple: Cross pairs 1-3 and 2-6
    (Cat.3 is 10Mbit ethernet, Cat.5 is 100Mbit and higher)
    Loggført


    Sider: [1]
    « forrige neste »